Table of Contents
Advertisement
Installation and operating manual
3. Installation
3.1. Warning
DANGER
Insufficient qualification, explosion
Improper handling and operation of the device can result in serious or even fatal injury, and/or
damage to property.
•
•
DANGER
Escaping compressed gas
Incorrect installation and device parts that are not properly secured and protected can cause
serious or even fatal injury.
•
•
•
•
•
•
Specialist technical personnel
1
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in a
position to foresee potential dangers in relation to the use of the device and are qualified to perform the tasks described in this
manual. Special operating conditions (e.g. aggressive media) require additional knowledge. It is the responsibility of the device
owner to ensure that the instructions in this manual are adhered to.
14
All tasks described in this installation and operating manual must be performed by specialist
technical personnel
who meet the criteria outlined below:
1
Before carrying out any work with or on the device, all specialist technical personnel¹ must have read
and understood the contents of this installation and operating manual.
Before carrying out any assembly or installation work, depressurise the system.
Use only pressure-resistant installation materials and suitable tools that are in proper working order.
Before pressurising the system, check all unit parts and repair them, if necessary. Open valves slowly
to prevent pressure blows during operation.
Make sure that no persons can be injured or objects can be damaged by condensate or escaping
compressed gas.
Protect the device parts against vibration and impact.
Perform a leakage test.
EN
BEKOMAT
8/9
®
Advertisement
Table of Contents
