Table of Contents
Advertisement
Installation and operating manual
4. Electrical installation
4.1. Installation instructions
DANGER
Insufficient qualification
Improper handling and operation of the device might result in serious or even fatal injury, and/or
serious damage to property.
•
•
DANGER
Mains voltage
Risk of serious or even fatal injury from electric shock when coming into contact with non-insulated,
powered components.
•
•
•
Specialist technical personnel
1
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in a
position to foresee potential dangers in relation to the use of the device and are qualified to perform the tasks described in this
manual. Special operating conditions (e.g. aggressive media) require additional knowledge. In addition, observe the requirements
for "qualified persons" as laid down in the Technical Rules on Operational Safety (TRBS). It is the responsibility of the device owner
to ensure that the instructions in this manual are adhered to.
4.2. Electrical connections
Alarm
16
All tasks described in this installation and operating manual must be performed by specialist
technical personnel
who meet the criteria outlined below:
1
Before carrying out any work with or on the device, all specialist technical personnel¹ must have read
and understood the contents of this installation and operating manual.
For the electrical installation of the device, adhere to all applicable regulations (e.g. VDE 0100 / IEC
60364).
Before carrying out any maintenance work, de-energize the system.
All electrical work must be carried out by authorised specialist technical personnel
Opening top part of cover:
•
Loosen the 4 screws
•
Remove the lid
For power cable connection (or alarm signal line): Disconnect the cable terminals at
the bottom
Power
1
EN
.
1
BEKOMAT
8/9
®
Advertisement
Table of Contents
