Hitachi HSC-2100 Hardware Manual page 144

⑫ If any initial values are set in DW registers, copy those values by performing this step
onwards of this procedure.
Otherwise, proceed to Step ⑰.
Go back to the S10/4α Ladder Chart System again and choose [MCS(M)] from the
[Utility(U)] pulldown menu.
⑬ Read the values from the DW registers according to the instructions given below.
5 MAKING USE OF MODULES
Choose [MCS(M)] from [Utility(U)]
pulldown menu.
Select the [Specify Symbol(P)] radio button.
Enter the symbol "DW000" in the edit box,
for example.
Click the [Read(R)] button.
5-43