Ppp; Overview - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.6 "Interfaces" menu
● Port Type
Select the type of port from the drop-down list.
– Switch Port VLAN Hybrid
– Switch-Port VLAN Trunk
● OperState
Displays the current operational status. The operational status depends on the configured
"Status" and the "Link". The available options are as follows:
– Up
– Down
● Link
Shows the physical connection status to the network. The available options are as follows:
– Up
– Down
4.6.2

PPP

4.6.2.1

Overview

This page shows the current status of the PPP connection.
212
The port sends tagged and untagged frames. It is not automatically a member of a VLAN.
The port only sends tagged frames and is automatically a member of all VLANs.
You have configured the status "enabled" for the port and the port has a valid connection
to the network.
You have configured the status "disabled" or "Link down" for the port or the port has no
connection.
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08