Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 99

Description of the displayed values
● Status
Shows the status of the connection to SINEMA RC Server.
● Device Name
If configured, the name of the device is displayed.
● Device Location
If configured, the location of the device is displayed.
● GSM Number
If configured, the phone number of the device is displayed.
● Vendor
If configured, the entry is displayed.
● Comment
If configured, the comment is displayed.
● Type of Connection (Server)
Shows which type of connection is set on the SINEMA RC Server.
● Type of Connection (Device)
Shows which type of connection is set on the device.
● Fingerprint
Shows the fingerprint of the server certificate. Is only displayed when the fingerprint is used
for verification.
● Remote Address
Shows the IP address of the SINEMA RC Server.
● Connected Local Subnet(s)
Shows the IP addresses of the local subnets. Is only displayed when the option "Connected
local subnets" is enabled on the SINEMA RC Server. You will find further information on this
in the Operating Instructions of the SINEMA RC Server.
● Connected Local Host (s)
Shows the destination IP address of the hosts that can be reached.
● Tunnel Interface Address
Shows the IP address of the virtual tunnel interface.
● Connected Remote Subnet(s)
Shows the subnets of the SINEMA RC Server that are reachable for the device. Which
subnets are reachable for the device depends on the communications relations on the
SINEMA RC Server. You will find further information on this in the Operating Instructions of
the SINEMA RC Server.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.4 "Information" menu
99