Page 4
Steamer head De-calc knob Steamer head holder Water tank Hang&lock Steam supply hose Pole lock clip Glove Pole Pleat maker & brush Steam knob Pants clips Base a 蒸汽喷头 h 除垢旋钮 b 蒸汽喷头支架 i 水箱 c 悬挂和锁定功能 j 蒸汽输送管 d 衣架锁夹 k 防烫手套...
Page 7
EN Your appliance has been designed to be used with tap water. In case you live in an area with hard water, fast scale build-up may occur. Therefore, it is recommended to use water without minerals such as distilled or purified water to prolong the lifetime of your appliance.
Page 9
This appliance is safe to use on all fabrics at any setting. Note: The steam supply hose becomes warm during steaming. This is normal. 本产品提供了多档蒸汽设置,便于节水和节能。 您可以调高蒸汽设置档位,以便随时获得更强劲的 蒸汽动力。本产品在任何档位下都可以安全用于所 有可熨面料。 注意:蒸汽熨烫期间,蒸汽输送管会变热。这是正 常的。 GC571 GC575, GC576 45 sec. GC571 GC575, GC576...
Page 10
EN AirStretch Technology uses air suction created in the steamer head to pull the garment closer to the steamer head, and stretches it for better steam penetration and easier wrinkle removal. Tip: When you are steaming with suction function, press the steamer head against the garment.
Page 12
GC575, GC576 EN Auto shut-off The ring flashes after the water tank is empty for 10 minutes. 自动关闭功能 水箱为空 10 分钟后,该环闪烁。 >10 min.
Page 13
EN Refill the water tank and insert it back. You can resume steaming after turning the steam knob. The ring should stop flashing. 为水箱加水并将其插回。您可以在转动蒸汽旋钮后 恢复蒸煮。环应停止闪烁。 EN If the water tank is not refilled within the next 10 minutes, the appliance starts to cool down and will shut off.
Page 15
EN To make crisp pleats, start steaming from the bottom half of the pants and move onto the top half to prevent accidental wrinkles on parts which have already been steamed. 要打造笔挺的裤缝,可先从裤子的下半部开始蒸汽 熨烫,然后再移至上半部进行熨烫,以防止熨烫过 的部分偶尔出现褶皱。...
Page 16
EN Put the glove on the hand you are using to hold a garment. The glove protects your hand against the steam from the steamer head. 将防烫手套戴在拿着衣物的手上。防烫手套可保护 您的手不被蒸汽喷头所喷出的蒸汽烫伤。...
Page 17
EN Caution: Do not attach or detach the pleat maker and brush while the steam is on or the steamer head is hot. Tip: Pleat maker is used to make pleats on shirts and trousers. Always point the steamer head upwards to prevent water dripping from the steamer head.
Page 19
Therefore, it is recommended to perform the de-calc process at least once a month. Before you start de-calc process, make sure there is some water in the water tank. 为了保持良好的蒸汽熨烫性能并延长产品的使用寿 命,定期去除产品内部的水垢和杂质是很有必要 的。因此,建议您至少每月执行一次除垢流程。 开始执行除垢流程之前,请确保水箱中留有一些水。 > 1 hour > 1 GC571 GC575, GC576...
Page 20
EN Note: Clean the appliance and wipe any deposits off the steamer head with a damp cloth and non-abrasive liquid cleaning agent. Always empty the water tank after usage, to prevent calc build-up and maintain good steam performance. 注意:用湿布和非腐蚀性液体清洁剂清洁本产品, 并擦去蒸汽喷头中的沉积物。 使用后务必将水箱倒空,以防止水垢的形成并保持...
Page 21
EN To maintain optimal suction power, regularly check and clean the grille to prevent fluff from clogging up the grille opening. Note: Only the grille can be removed for cleaning. All the other parts on the steamer head are not removable. Never use scouring pads or brush to clean the black surface.
Page 24
Possible cause Solution Problem The appliance The steamer has not Let the appliance produces no heated up sufficiently. heat up for steam or irregular approximately steam. 45 seconds. Steam has condensed Lift the steamer in the hose. head to straighten the hose vertically.
Page 25
Possible cause Solution Problem Some moisture may be This is normal. Wipe collected at the sides off the sides of the of the steamer head steamer head with when suction function a cloth. is being activated. An excessive The water in the Perform de-calc amount of appliance is dirty or...