To Program Progammable Button; Caller Id; System Speed Dial; Personal/ Station Speed Dial - NEC SL1000 Programming Manual

- Assign extensions into Delay Ring Group
[22-08-01] DIL/ IRG No Answer Destination
- Day time/ Night time, Trunk 1/2/3/4, where to delay ring? (key in Delay
Ring Group Number)
[22-01-04] Normal DIL Incoming Call No Answer Time (sec)
- To set when to start ring at Delay Ring Group?

Caller ID

[14-02-10] Caller ID – Set Caller ID for Analogue Trunk Line
- 0 = disable, 1 = enable
[15-03-09] Caller ID External Module – Set Caller ID for SLT
- 0 = disable, 1 = enable
[15-03-11] Caller ID Type – default = FSK(0)
- 0 = FSK, 1 = DTMF

To Program Progammable Button

Function Key Normal Code – function 00 – 99, #00 - #99
Function Key Appearance Code – function *00 - *99
1) To clear function key
SPEAKER + 852 + key + 000
2) To program trunk key
SPEAKER + 852 + key + *01 + 01 (as trunk 1)/ 02 (as trunk 2)
3) To program extension number (DSS)
SPEAKER + 851 + key + 01 + extension number + HOLD

System Speed Dial

[13-01-03] Assign Bin Size (default 1000, 0~999)
4 digit Bin can only access by Directory Dial feature, not Service Code
[13-04-01] Enter System Speed Dialing Numbers and Names (no need prefix 9)
[11-10-04] Service Code for Storing Common Speed Dialing Numbers by Phone
(default 853)
[11-12-10] Service Code for Accessing Common Speed Dial (default 813)

Personal/ Station Speed Dial

[11-01-01] System Numbering
st
- 1 Dial Digit, select 6
- Under 6x, Dial Digit Length = 1, Type = Service Code
[11-12-40] Speed Dial Station (One Touch), change to 6 (default 761)
[15-14-01] Select desired extension, enter prefix 9 + dial number
[11-11-39] Service Code for Storing Station Speed Dialing Numbers by Phone
(default 855)
To store a Personal/ Station Speed Dialing Number (SLT Phone only)
1. Lift the Handset
2. Dial *6 (default 855),
3. Dial the Station Speed Dial buffer number to be programmed (0~9)
4. Enter prefix 9 + dial number + Hang up
3
Prepared by Voice IP Solutions (M) Sdn Bhd