Huawei LUNA2000 Series User Manual page 8

LUNA2000-(5-30)-S0
User Manual





General Requirements
Do not work with power on during installation.









Personal Safety






Issue 01 (2020-09-18)
Unauthorized modifications to the product or software code or removal of the product
Failure to follow the operation instructions and safety precautions on the product and in
this document
Equipment damage due to force majeure, such as earthquakes, fire, and storms
Damage caused during transportation by the customer
Damage caused by storage conditions that do not meet the requirements specified in
related documents
Do not install, use, or operate outdoor equipment and cables (including but not limited to
moving equipment, operating equipment and cables, inserting connectors to or removing
connectors from signal ports connected to outdoor facilities, working at heights, and
performing outdoor installation) in harsh weather conditions such as lightning, rain,
snow, and level 6 or stronger wind.
After installing the equipment, remove idle packing materials such as cartons, foam,
plastics, and cable ties from the equipment area.
In the case of a fire, immediately leave the building or the equipment area, and turn on
the fire alarm bell or make an emergency call. Do not enter the building on fire in any
case.
Do not scrawl, damage, or block any warning label on the equipment.
Tighten screws using tools when installing the equipment.
Understand the components and functioning of a grid-tied PV power system and relevant
local standards.
Repaint any paint scratches caused during equipment transportation or installation in a
timely manner. Equipment with scratches cannot be exposed to an outdoor environment
for a long period of time.
Do not open the host panel of the equipment.
Without prior consent from the manufacturer, do not alter the internal structure or
installation procedure of the equipment.
Wear proper personal protective equipment (PPE) during operation. If there is a
probability of personal injury or equipment damage, immediately stop the operations,
report the case to the supervisor, and take feasible protective measures.
Use tools correctly to avoid hurting people or damaging the equipment.
Do not touch the energized equipment, as the enclosure is hot.
To ensure personal safety and normal use of the equipment, the equipment must be
reliably grounded before use.
When a battery is faulty, the temperature may exceed the burn threshold of the touchable
surface. Therefore, avoid touching the battery.
Do not disassemble or damage the battery. The released electrolyte is harmful to your
skin and eyes. Avoid contact with the electrolyte.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
2