Enabling Bios - Fujitsu PRIMEQUEST 2000 Series Manual
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
3. After the completion of initialization, you are returned to the [Adapter Selection] screen.
2.1.6 Enabling BIOS
Enable the HBA BIOS so that the HBA can recognize the LUNs of the SAN storage unit and to enable the system to be
started from one of them.
1. Select [Set Boot from SAN <Disable>] from the [Emulex Adapter Configuration Main Menu] screen.
The screen for selecting <Disable> or <Enable> appears. Select <Enable>, and then press the [Enter] key.
FIGURE 2.12 Set Boot from SAN Enabling boot (1)
2. Confirm that [Set Boot from SAN < Enable >] is displayed.
FIGURE 2.13 Set Boot from SAN Enabling boot (2)
C122-E206-04EN
21
Advertisement
Table of Contents
