Huawei NetCol5000-A User Manual page 67

ACC Precision Air Conditioner Controller
User Manual
Menu
Home
Screen >
Settings >
Comm
Settings >
IP Setting
Home
Screen >
Settings >
Comm
Settings >
Modbus
Setting
Home
Screen >
Settings >
Alarm
Settings
Issue 02 (2016-11-30)
Parameter Description
LCD.
LCD backlight Sets the time of no operation
off delay after which the controller LCD
backlight turns off.
IP assigning Sets the way of allocating IP
mode addresses for precision air
conditioners.
IP address Sets the IP address for the
precision air conditioner.
Subnet mask Sets the subnet mask for the
precision air conditioner.
Gateway Sets the gateway for the
precision air conditioner.
Baud rate The baud rate for the
communication between the
precision air conditioner and
the EMS can be set to 9600
and 19200. The value should
be consistent with that set on
the EMS.
Comm address Sets the address for the
communication between the
precision air conditioner and
the EMS.
Connection mode Sets the communication mode
between a device and the
EMS.
Client encryption This parameter is configurable
when Connection mode is set
to Client.
Server This parameter is configurable
encryption when Connection mode is set
to Server.
EMS IP address Sets the IP address of the
EMS.
EMS port Sets the port of the EMS.
Action Three options are available for
setting whether to report an
alarm.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Allow: Alarms are reported
to the EMS. The LCD
displays active alarms and
the system implements
A Parameter Description
Default Value
3 min
Manual
192.168.000.010
255.255.255.000
192.168.000.001
9600
1
Server
Enable
Disable
000.000.000.000
16100
Allow
61