Huawei NetCol5000-A User Manual page 71

ACC Precision Air Conditioner Controller
User Manual
Menu
Home
Screen >
Settings >
System
Settings >
T/H Sensor
Issue 02 (2016-11-30)
Parameter Description
function is enabled.
You are not recommended to
change the value.
Anti-cond delay Sets the time delay for
enabling the anti-condensation
function when the conditions
for starting the
anti-condensation function are
met.
You are not recommended to
change the value.
Max diagnostic Sets the maximum duration for
mode duration
diagnostic mode. If the
duration reaches the value, the
system exits the diagnostic
mode automatically.
T/H control type Sets the temperature and
humidity control type to
Cold-aisle, Hot-aisle,
Return-air, or Supply-air.
The selected T/H control type
corresponding to the
temperature and humidity set
points is enabled.
Temp control Controls the temperature
mode inside the room or aisles based
on the Average, Maximum,
or Minimum of the
temperatures collected by each
sensor.
Supply-air temp Sets the supply air temperature
set point set point for a precision air
conditioner after T/H control
type is set to Supply-air.
The precision air conditioner
performs the cooling or
heating based on the value.
Supply-air humid Sets the supply air humidity
set point set point for a precision air
conditioner after T/H control
type is set to Supply-air.
The precision air conditioner
performs the humidification or
dehumidification based on the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Parameter Description
Default Value
20 min

NetCol5000-C: 30
min

NetCol5000-A035
(025),
NetCol5000-A020,
NetCol8000-C: 60
min
 NetCol5000-A020,
NetCol8000-C:
Return-air
 NetCol5000-A035
(025),
NetCol5000-C:
Supply-air
Average
 NetCol8000-C:
22.0° C
 NetCol5000-A035
(025),
NetCol5000-C:
23.0° C
 NetCol5000-A020
: 24.0° C
50.0% RH
65