Function - Canon imageRUNNER ADVANCE C5500 Series Service Manual

FEEDER > ADJUST
ADJMSCN2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit

FUNCTION

FEEDER > FUNCTION
MTR-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
TRY-A4 1
Detail
Use Case
Adj/Set/Operate Method
TRY-A5R 1
Detail
Use Case
Adj/Set/Operate Method
TRY-LTR 1
Detail
Use Case
Adj/Set/Operate Method
TRY-LTRR 1
Detail
Use Case
Adj/Set/Operate Method
Fine adj img ratio:2-sided,horz scan,bck
To make a fine adjustment of the back side image magnification ratio in horizontal scanning
direction at DADF 2-sided reading.
As the value is incremented by 1, the image is enlarged by 0.1% in horizontal scanning direction.
When image magnification ratio on the front side and back side are different at 2-sided reading
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
-10 to 10
%
0
0.1
Specification of DADF operation motor
To specify the motor of DADF to operate.
The motor is activated by MTR-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 2
0: Pickup Motor (STM2)
1: Regist Motor (STM1)
2: Read Motor (STM3)
FEEDER> FUNCTION> MTR-ON
Adj of DADF Tray width detect ref 1: A4
To automatically adjust the paper width detection reference point 1 for the DADF Original Pickup
Tray. (A4)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref 2: A5R
To automatically adjust the paper width detection reference point 2 for the DADF Original Pickup
Tray. (A5R)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref 1: LTR
To automatically adjust the paper width detection reference point 1 for the DADF Original Pickup
Tray. (LTR)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref2: LTRR
To automatically adjust the paper width detection reference point 2 for the DADF Original Pickup
Tray. (LTRR)
- When replacing the Original Width Volume (VR)
- When replacing the Reader Controller PCB/clearing RAM data
Select the item, and then press OK key.
1072
8. Service Mode