Configuration And Settings; Creating The Project Configuration; Configuration Of The Components - Siemens SINAMICS G110M Manual

6 Configuration and Settings

6.1 Creating the project configuration

Configuration and Settings
6
6.1 Creating the project configuration

If you only wish to download and commission the example program,
Note
please follow the instructions in chapter ‎
the

The procedure described in the step table below represents one option
of configuring a SIMATIC S7-1200 and parameterizing a SINAMICS
G120 DP for data exchange between SIMATIC controller and SINAMICS
drive. TIA Portal offers several possible solutions that differ to a greater
or lesser degree from the procedure shown here.
The step tables below describe what to do if you do not want to use the example
code, but wish to configure the SIMATIC S7 CPU, SINAMICS G120C and the HMI
KTP600. The configuration of the SIMATIC S7-1200 and the configuration of the
HMI control panel are not subject of this chapter.
6.1.1

Configuration of the components

Table 6-1: Creating the project configuration
No. Action
1. Open TIA Portal.
2. If TIA Portal opens in the
Portal view, go to the bottom
left to switch to the Project
view.
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4,
application"
Creating the project
07/2018
3 "Setting up and commissioning
Remarks
45