Motor connection, shield support and fabrication
4.1 Motor plug connector for Motor Modules 3 A ... 30 A
Detaching the preassembled power cable from the motor connector
If the power cable needs to be routed through a confined space, the motor connector must
be detached from the preassembled cable.
Preassembled power cable with push-in connect-
or
Note
Screwdrivers with an insulated shaft are not suitable because it will not be possible to insert
them deep enough into the terminal.
86
To remove, insert a 0.6 x 3.5 slot-head screw-
driver into the opening provided above the termi-
nal location and withdraw the conductor.
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0