Double Motor Modules - Siemens SINAMICS S120 Manual

Motor Modules in booksize C/D-type format
3.8 Technical data
D-type
Ventilation clearances
above/below
Weight
Higher output frequencies up to a maximum of 3200 Hz are possible with an additional license.
1)
Default for 400 V line systems; undervoltage trip threshold can be reduced by up to 80 V and is adjusted to the parame-
2)
terized rated voltage
When using 6 mm thick DC link (article number 6SL3162-2BB00-0AA0): 200 A
3)
Rated power of a typical standard induction motor at 400 V 3 AC
4)
Note
Operation of 18 A to 30 A Single Motor Modules with 300 % overload connected to a 16 kW
Line Module
The maximum power of a 16 kW Line Module is not sufficient for operating 18 A up to 30 A
Single Motor Modules at their peak current.
• Take into consideration the motor power if you wish to operate an 18 A, 24 A or 30 A
Single Motor Module on a 16 kW Line Module. Depending on the operating state, the
power consumption of these Single Motor Modules can be > 35 kW, and it may be
necessary to install a Line Module with a higher power rating for applications such as
these.
3.8.2

Double Motor Modules

Table 3- 8 Technical data of Double Motor Modules in booksize C-type format (2 x 18 A)
C-type
Output current
Rated current (l )
n
Base load current (I )
H
Intermittent duty current (I
Peak current (l )
max
Output voltage 3 AC
Output frequency
DC link current
DC link voltage
DC link capacitance
Overvoltage trip
Undervoltage trip
2)
Electronics power supply
Electronics current drawn
at 24 V DC
64
6SL3120
-
mm
kg
) 40 %
s6
1TE13- 1TE15- 1TE21-
0AD. 0AD. 0AD.
4.6 4.6 4.6
6SL3120- 2TE21-8AC.
A 2 x 18
AC
A 2 x 15.3
AC
A 2 x 24
AC
A 2 x 36
AC
V 0 ... 0.717 x DC link voltage
AC
(0 ... 480 V at 670 V DC)
Hz 0 ... 550
A 43
DC
V 510 ... 720
DC
μF 705
V 820 ± 2 %
DC
V 380 ± 2 %
DC
V 24 (20.4 ... 28.8)
DC
A 1.1
DC
1TE21- 1TE22-
8AD. 4AD.
≥ 80
4.6 4.7
1)
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0
1TE23-
0AD.
7.9