Silvercrest 289564 Operation And Safety Notes page 24

output voltage of 5 V and an
output current of at least 2 A.
Connect the USB cable 6 with
the Micro USB Input 4 of the
power bank 5 .
Connect the other end of the
USB cable 6 (USB Type A)
to a USB power supply (not
included in the scope of
delivery) (see fig. B).
The current battery status is
shown by LED indicator 2
and LED light will flash Blue
during the charging process.
The required charging time for
the power bank depends on
the charging source and its
GB 25