Huawei PDU8000 Quick Manual page 7

1. Open the front and rear doors of the PDC,
and remove one ground cable from the
front and rear doors respectively.
3. Remove the front and rear door sills and
buckles by pulling them upwards in a tilted
way.
5. Move the PDC away from the pallet using
a forklift.
6. Reinstall the front and rear door sills and
buckles.
7. Reinstall the front and rear ground cables.
8. Adjust the PDC leveling feet using an
adjustable wrench to ensure that all
castors touch the ground.
Securing the Cabinet to the Floor
2. Remove the screws from the front and rear
door sills and buckles.
4. Remove the two L-shaped brackets from
the PDC front and rear, and remove the
bolts from the pallet under the PDC.
1. Mark the mounting holes for PDC
bolts using a marker based on the
marking-off template, as shown in
the figure.
2. Use a hammer drill to drill holes to
depths of 52 mm to 60 mm at the
positions for installing expansion
bolts.
6