Epson B12B808411 User Manual page 13

Network Interface Panel
B
When the home screen ("Scanner is ready") is displayed, press the F setting button.
C
Select Network with the u up and d down buttons, and then press the Z button.
D
Select IPv4 with the u up and d down buttons, and then press the Z button.
E
Select Manual with the u up and d down buttons, and then press the Z button.
F
Select IP address with the u up and d down buttons, and then press the Z button.
G
Set the IP address with the arrow buttons, and then press the Z button.
H
Repeat steps 6 and 7 to set the IP subnet mask and IP default gateway settings, and then press the Z button.
I
Press the F setting button to return to the home screen.
J
After "Configuring network setting" is displayed, restart the panel.
Set the password for protecting network security using Web-based EpsonNet Config.
"Using EpsonNet Config" on page 14
U
User's Guide
Setting Up the Network Interface Panel
13