Scanning Over A Network - Epson B12B808411 User Manual

Network Interface Panel
Windows 7/Windows Vista/Windows XP:
Click the start button, and then select All Programs or Programs > EPSON > Epson Scan 2 > Epson Scan 2
Utility
Mac OS X:
Select Go > Applications > EPSON Software > Epson Scan 2 Utility
C
Select Settings from the Scanner drop-down list on the Epson Scan 2 Utility screen.
If Epson Scan 2 Utility screen is not displayed and Scanner Settings screen is displayed, go to the next step.
D
In the Scanner Settings screen, click Add.
If the Add button is disabled, click Enable Editing (Windows) or + button (Mac OS X), and then click Add
button.
E
In the Add Network Scanner screen, select your scanner from the Model drop-down list.
F
Choose the Network Interface Panel's IP address under Search for Network, or select Enter address and type in
the address. Then click Add.
G
In the Scanner Settings screen, select your scanner, and then click OK.

Scanning Over a Network

Note:
You must set the IP address for your Network Interface Panel before you can scan using it.
User's Guide
Scanning an Image
18