Connecting To An Ipv6 Network; Using Epsonnet Config - Epson B12B808411 User Manual

Network Interface Panel

Connecting to an IPv6 Network

A
Turn on your scanner.
B
When the home screen ("Scanner is ready") is displayed, press the F setting button.
C
Select Network with the u up and d down buttons, and then press the Z button.
D
Select IPv6 - On with the u up and d down buttons, and then press the Z button.
E
Press the F setting button to return to the home screen.
F
After "Configuring network setting" is displayed, restart the panel.
Note:
Use the Web-based EpsonNet Config to make manual settings for IPv6.
Set the password for protecting network security using Web-based EpsonNet Config.
"Using EpsonNet Config" on page 14
U

Using EpsonNet Config

Web-based EpsonNet Config is software that is stored on the Network Interface Panel.
User's Guide
Setting Up the Network Interface Panel
14