Web-Based Epsonnet Config Cannot Be Started Or Be Made Settings - Epson B12B808411 User Manual

Network Interface Panel
❏ In Network Scanning Settings, check that the Group settings for Document Capture Pro are the same as the
settings for Network Interface Panel.
U See the Document Capture Pro help for more details.
"Scanning from the Panel" on page 19
U
❏ Check that Epson Event Manager (Document Capture Pro) is not being blocked by a Firewall.
U See the user's guide of the scanner for more details.
❏ Check that the IP address is set correctly.
U See the user's guide of the scanner for more details.
❏ Check that there are several network interface panel (scanner) on the network.
On your computer, recognise the scanner using MAC address of this product.
"Environment menu" on page 21
U

Web-based EpsonNet Config cannot be started or be made settings.

❏ Check that IPv4 address is set to this product.
To start Web-based EpsonNet Config, set IP address first. You can set from this product control panel or from
EpsonNet Config for Windows/Macintosh.You can check the current setting from the control panel menu.
"Menu List" on page 21
U
User's Guide
Troubleshooting
25