Silvercrest SDMF 1630 A1 Operation And Safety Notes page 19

Ensure the rated voltage shown
¾
on the rating label corresponds
with the voltage of the power
supply .
Use
m WARNING! Risk of injury!
Turn off the product and
disconnect it from the mains
before cleaning and when the
product is not in use .
The product must not be left
¾
unattended while it is connected
to the mains .
The power plug must be removed
¾
from the power outlet before the
water tank is filled with water .
The product must be used and
¾
rested on a flat, stable surface .
When placing the product on
¾
its base, ensure that the surface
on which the base is placed is
stable .
The product is not to be used if
¾
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Do not operate the product with
a damaged power cord or plug,
when the product malfunctions
or has been damaged in any
manner .
Only use the product in dry
¾
indoor rooms .
Do not operate the product with
¾
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Protect the product against heat .
¾
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
Protect the power cord against
¾
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
Stop using the product if the anti-
¾
kink protection on the power cord
is damaged!
GB/IE 19