Keypad Programming Choices; Master Arm Delay; Mstr Arm Inst; Perim Instant - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 2.0
Table 25: Keypad Programming Choices
Selection Description
Blank Disable the function panel-wide.
The keypad shows NO
AUTHORITY if you access the
function using a command or the
Function List.
E Enable the function panel-wide. The
function can be executed without
entering a pass code.
P Pass code required. When the pass
code is entered at the keypad, the
control panel checks the user's
authority level. Refer to Section
2.11.4 Authority Level Selections
on page 61.
Refer to Section 2.11.4 Authority Level
Selections on page 61 for a detailed
description of the functions on the following
pages. These parameters determine only if
the authority level functions are pass-code
protected.

Master Arm Delay

Default: P
Selection:
Blank, E, or P
P Pass code: Required for all users with
Master Arm Delay enabled for their
authority level.
E Enable: A user does not need a pass
code to use [COMMAND][1].
Blank Disable Master Arm Delay cannot be
accessed in the function menu or
started with a command even if this
function is enabled for the user's
authority level.
Function No. Function Name
2 Master Arm Delay
Use this arming function to master arm disarmed
areas. If enabled, the following arming choices are
available to the user with this authority.
Bosch Security Systems | 5/05 | F001U003636B
GV2MAIN

Mstr Arm Inst

Use this arming function to master arm instant areas
that are disarmed. If enabled, the following arming
choices are available to the user with this authority.
Entry and exit delays are not provided with this
arming function. This causes a Perimeter and Interior
Delay point to act as an Instant point.

Perim Instant

Instant arms all perimeter points with point response
that starts an instant alarm (refer to
in Section 4.2 Point Responses on page 85) in the area
where the keypad is assigned. Entry and exit delays
are not provided with this arming function. This
function causes a Perimeter Delay point to act as a
Perimeter Instant point.

Perim Delay

Delay arms all Perimeter points in the area where the
keypad is assigned. Entry and exit delays are provided
with this Arming function. This function does not
cause a Perimeter Instant point to act as a Delay point.
Alternate Keystroke
[COMMAND][1]
Default: Blank
Selection:
Blank, E, or P
Function No. Function Name
3 Master Arm Instant
Default: P
Selection:
Blank, E, or P
Function No. Function Name
4 Perimeter Instant
Arm
Default: P
Selection:
Blank, E, or P
Function No. Function Name
5 Perimeter Delay
Arm
EN | 55
Alternate Keystroke
[COMMAND][1][1]
Alternate Keystroke
[COMMAND][2]
P## Pt Response
Alternate Keystroke
[COMMAND][3]