Table of Contents
Advertisement
Standard installation dimensions (continued)
SH
Projected image height
SW
Projected image width
SD
Projected image size
L(LW/LT)*
1
Projection distance
*1 : LW : Minimum projection distance when the zoom lens is used
LT : Maximum projection distance when the zoom lens is used
Note
z Depending on the product, the appearance may differ from the illustrations in these installation instructions.
Attention
z Provide at 500 mm (19-11/16") of space on intake side of the projector and 1000 mm (39-11/16") of space on the exhaust
side of the projector to ensure that the air intake and exhaust vents do not become blocked.
z Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner or lighting
equipment.
■ Dimensional relationship
For the formula of the projection distance (L) and the other specifications (H1 / H2, L1, L2F / L3F, L2R / L3R),
refer to the appendix at the end of this instruction.
6 - ENGLISH
Distance from the center of lens to the attachment plate
H1 / H2
(including plate thickness)
L1
Lens protrusion dimension (from front of set to tip of lens)
Distance from the center of attachment plate to the front end of
L2F / L3F
lens
Distance from the center of attachment plate to the rear end of
L2R / L3R
projector
Advertisement
Table of Contents
