Silvercrest SPO 55 Instructions For Use And Safety Notes page 83

Problem Possible cause
Pulse oximeter Circulation problems in the
shows interrupted finger being measured.
measurements or
The finger being measured is
severe jumps in the
too large or too small.
measurement.
The finger, hand or body are
moving.
Arrhythmia.
Solution
Refer to warnings and safety notes.
The fingertip must be the following size: be-
tween 10 and 20 mm wide. Between 5 and
15 mm thick.
Keep the finger, hand and body still during
measurement.
Seek medical attention.
GB/IE 83