Table of Contents
Advertisement
5.5 On Screen Navigation
1)
Splash Screen
When the tool is powered on, the first screen displayed is referred to as the
splash screen. This screen tells you the tool is booting up. Once the tool is
fully powered up, the screen will automatically switch to the live screen.
2)
Live Screen
The live screen is where you will do most of your work. A live image of
what the imager head sees is displayed on the screen. You can zoom, adjust
LED brightness, rotate images and videos, view and capture photos and
videos from this screen.
3)
Switching from Still Image Capture to Video Capture
The tool defaults to still image capture when powered on. Press Video/
Camera button to switch between still image capture and video capture as
required.
4)
Adjusting LED Brightness
Pressing RIGHT and LEFT arrow buttons on the key pad (in the still
camera mode) will increase or decrease the LED brightness. A brightness
indicator bar will be displayed on the screen as you adjust brightness. (Fig.
7)
Page 18
Fig. 7
Original Language Version
VS8197.V2
Issue: 1 - 23/11/11
Advertisement
Table of Contents
