ABB i-bus
®
KNX
Planning and application
4.2
The i-bus
The ABB i-bus
It simplifies commissioning on the IP side.
Go to the start page of the i-bus
appears.
Ribbon: Switching between Discovery, Firmware Update and Unicast
Click the corresponding button to select Discovery or Unicast mode.
4.2.1
Discovery
Select Discovery mode in the ribbon area. This function serves to find and display ABB IP devices in the
network. Not all information is displayed when the IP Router is operated in KNX Secure mode.
Note
The functions are described in the i-bus
®
Tool
®
Tool is required in order to set certain functions of the ABB IP devices.
®
Tool, click Connect and then click IP devices in the window that then
®
Tool online help.
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 41