Product Overview; Before Operation Safety - Toro TX 525 Operation And Safety Manual

Product Overview

1. Road wheels
2. Track
3. Lift cylinder
4. Cylinder lock
5. Loader arms
6. Hood
7. Auxiliary hydraulic
couplers
Figure 1
8. Mount plate
9. Reverse-safety plate
10. Control panel
11. Tie-down/lift loop
12. Rear-access cover
13. Side panel screen
Controls
Become familiar with all the controls
you start the engine and operate the traction unit.
Control Panel
g313997
1. Auxiliary hydraulics lever
2. Key switch
3. Hour meter
4. Fuel gauge
5. Indicator lights and
glow-plug switch
6. Throttle lever
Operation
g313998
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age or require certified training of
the operator. The owner is responsible for training
all operators and mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety decals.
•
Always engage the parking brake (if equipped),
shut off the engine, remove the key, wait for all
moving parts to stop, and allow the machine
to cool before adjusting, servicing, cleaning, or
storing the machine.
6
(Figure 2) before
Figure 2
7. Loader-arm/attachment-tilt
lever
8. Parking-brake lever
9. Traction control
10. Reference bar
11. Loader-control-reference
bar
12. Loader-valve lock
g013016