Product Overview; Controls - Toro 22322 Operator's Manual

Product Overview

1. Track
2. Track-adjustment chamber
3. Lift cylinder
4. Cylinder lock

Controls

Become familiar with all the controls
start the engine and operate the traction unit.
1. Auxiliary-hydraulics lever
2. Throttle lever
3. Choke lever
4. Fuel gauge
5. Hydraulic-fluid
temperature light
6. Hour meter/tachometer
7. Key switch
5. Loader arms
6. Hood
7. Auxiliary-hydraulic couplers 11. Control panel
8. Tilt cylinder
(Figure 5) before you
Figure 5
8. Loader arm/attachment tilt
lever
9. Loader-valve lock
10. Parking-brake lever
11. Traction control
12. Reference bar
13. Loader-control-reference
bar
Figure 4
9. Mount plate
10. Tie-down/lift loop
12. Rear-access cover
Key Switch
The key switch, used to start and shut off the engine, has 3
positions: O , R
FF UN
•
To start the engine, rotate the key to the R
the glow-plug light comes on. When the glow-plug light
turns off, turn the key to the S
key when the engine starts and it moves automatically
to the R position.
UN
•
To shut off the engine, rotate the key to the O
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever forward.
After the engine starts, regulate the choke to keep the engine
running smoothly. As soon as possible, move the choke lever
all the way rearward.
Note: A warm engine requires little or no choking.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary-hydraulics lever. To ensure smooth,
controlled operation, do not take both hands off the reference
bar while operating the traction unit.
13
13. Fuel tank
14. Reverse-safety plate
, and S .
TART
position. Release the
TART
position,
UN
position.
FF