Selection Of Events To Be Reported - Siemens SENTRON 7KN POWERCENTER 3000 Manual

5.7.3

Selection of events to be reported

The dosage of events to be reported is controlled by means of several steps.
1. For the individual branches of a power distribution system, the events to be reported can be
set according to cause and priority on the SENTRON devices in powerconfig using the "View"
parameter in the Events section.
2. With 7KN Powercenter 3000, the events to be reported can be further qualified according to
possible causes such as
• Disturbance of a function/service of 7KN Powercenter 3000
• Circuit breaker tripping, alarm
• Device alarm, e.g. limit violation
• Operator action.
This can be done either with powerconfig or in the web user interface under "Settings →
General → Events".
This ensures that event messages focus on the essential information.
7KN POWERCENTER 3000
Equipment Manual, 07/2020, L1V30579222003-03
5.7 Notification of exceptional situations
Functions
77