Shutting Off The Engine - Toro Z Master 8000 Series Operator's Manual

Riding mower with 122cm cutting unit
Hide thumbs Also See for Z Master 8000 Series:
Table of Contents

Advertisement

2.
Engage the parking brake; refer to
Parking Brake (page
3.
Move the PTO-engagement lever to the O
position
(Figure
23).
4.
Move the throttle lever midway between the
S
and F
positions.
LOW
AST
5.
For EFI machines: Move the choke control to
the C
/O
position. On a warm engine,
LOSED
N
leave the choke in the OPEN/OFF position.
Figure 23
6.
Turn the key to the S
When the engine starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start, wait 15 seconds between attempts.
Failure to follow these instructions can burn
out the starter motor.
Note:
You may need multiple attempts to start
the engine the first time after adding fuel to an
empty fuel system.
Engaging the
21).
FF
position
(Figure
23).
TART
7.
If the choke is in the C
gradually return choke to the O
as the engine warms up.

Shutting Off the Engine

CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
1.
Disengage the PTO.
2.
Move the speed-control lever to the NEUTRAL
position.
3.
Engage the parking brake.
4.
Place the throttle in the middle position.
5.
Let the engine idle for 15 seconds, then turn
the key switch to the OFF position and remove
the key.
g032743
23
/O
position,
LOSED
N
/O
PEN
FF
Figure 24
position
g032744

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74311te

Table of Contents