Shutting Down The Gigabeat; After A Set Time (Sleep) - Toshiba U202-BK User Manual

Shutting down the gigabeat® after a set time (sleep)
The countdown timer is set and the countdown begins. To stop
the countdown, press the Enter button again. To restart the
countdown, press the Enter button again. When the countdown
reaches 0 (zero), the timeout notification screen is displayed.
The gigabeat
the alarm.
8 Press the Enter or Back button to stop the alarm.
NOTE

Shutting down the gigabeat

You can use the timer to have the gigabeat
a specified time. However, if you have already set 5 minutes as the
Auto Power Off setting, the gigabeat
approximately 5 minutes if it is not used.
1 Press and hold the Back button until the main menu is
displayed (about 1 second).
2 Press the Up or Down button to select Timer.
Library
FM Radio
Line-in Recorder
Photos
Timer
Settings *
(Sample Illustration) Selecting Timer from the main menu
3 Press the Right or Enter button.
The Timer menu screen is displayed.
4 Use the Up or Down button to select Sleep.
®
stops any music that is being played and sounds
❖
You cannot record while the countdown is running.
❖
Turning the gigabeat
countdown.
❖
To check the countdown time after viewing another screen,
perform steps 1 through 6 above.
❖
The alarm stops after approximately 1 minute.
Using the Timer
®
off during a countdown cancels the
®

after a set time (sleep)

®
®
will turn off after
to shut itself down after
103