Toshiba U202-BK User Manual page 51

6 Press the Enter button where you want to set point B (the
ending point).
Point B is set. The Set Point B screen closes and A-B repeat
playback begins.
A B Repeat
Set Point B
(Sample Illustration) Selecting the ending point (point B)
❖
NOTE
❖
❖
❖
Transferring and listening to audio files
If you select and set A-B Repeat while playback is paused,
the current point is set as A and the gigabeat
resume playback. You should then set point B as described in
step 6 above.
Points A and B must be within the same track.
When you are setting the position of point A or point B, you
can reverse or fast forward by holding down the Left or Right
button respectively. However, if you press or hold down the
Left button when setting point B and then reach point A, the
®
gigabeat starts playing from point A. Similarly, if you press or
hold down the Right button and reach the end of the track, the
®
gigabeat pauses playback at the end of the track.
If you press the Left or Right button during A-B repeat
playback, the gigabeat
from there.
Repeat/Shuffle
®
skips to point A and begins playback
51
®
is then ready to