Introduction - Toshiba JK Series Instruction Manual

INTRODUCTION

Page 5
It is the intent of this manual to provide a guide for the installation of Toshiba medium voltage control
components in NEMA Class E controllers manufactured by original equipment manufacturers (OEMs).
This manual consists of a section of general safety instructions and is marked throughout with warning
symbols. Read this manual thoroughly for instructions pertaining to installation of components
furnished with the OEM kit and also read the JK Series Medium Voltage Controller manuals VF010H01
(withdrawable contactors) and VF010H02 (fixed-type contactors) for additional operation and
maintenance instructions.
This manual and all accompanying drawings should be considered a permanent part of the equipment.
They should be readily available for review and reference at all times. This manual is not intended to
cover all details, combinations, or variations of the equipment. Always refer to drawings accompanying
the equipment for additional details.
All safety warnings must be followed to ensure personal safety. General safety instructions are
found on pages 1 and 2. Read and save these instructions for future reference.
Follow all precautions to attain proper equipment performance and longevity.
Dimensions shown in the manual are in metric and/or their English equivalent.
This manual is divided into major sections of interest, as follows:
GENERAL DESCRIPTION – Provides a description of the equipment, information on major
components and how they function.
RECEIVING, INSPECTION AND HANDLING – Describes procedures for receiving, unpacking,
inspecting, handling, lifting and moving the components.
INSTALLATION – Provides information on installing the power cell in the enclosure and also
installation of the withdrawable contactor carriage.
PRE-ENERGIZATION CHECK – Provides a checklist for preparing the equipment for energization.
DISPOSAL – Lists procedures for the safe disposal of the equipment when the service life has expired.
STORAGE – Provides guidelines for storing new equipment for an extended period of time.
SPECIFICATIONS – Covers ratings and other specifications of the contactor.
WARRANTY AND LIMITATION OF LIABILITY – Details Toshiba International Corporation's standard
warranty terms.