Required Tools; Assembly Tool For Ca Motor - Bosch Rexroth Hagglunds CA Series Installation & Maintenance Manual

Driven shaft
Fig. 13: Mounting CA motor with assembly tool
Installation | Hägglunds CA Radial piston hydraulic motor
7.3

REQUIRED TOOLS

7.3.1

Assembly tool for CA motor

For easier and faster mounting of the motor on the coupling adapter or driven
shaft, a special assembly tool can be used. The assembly tool is passed through
the motor and screwed into a pre made thread in the coupling adapter or driven
shaft. The motor is pulled onto the shaft by turning the nut on the assembly tool.
Material ID Assembly tool for CA motor:
Material ID R939003803
Assembly tool
Assembly tool
1. Tie rod
2. O-ring
3. Washer
4. Nut
DD00100406, DD00104814
RE 15305-WA, Version 11.2019, Bosch Rexroth AB
23/76
1
2
3
4