Product Storage; Standing The Motor On A Flat Surface - Bosch Rexroth Hagglunds CA Series Installation & Maintenance Manual

DD00104811
Fig. 11: Example, CA motor standing on a flat surface
Transport and storage | Hägglunds CA Radial piston hydraulic motor
6.2

PRODUCT STORAGE

The motor is delivered with internal protection in the form of an oil film with vapor
state corrosion inhibitors, and external protection in form of a VCI plastic bag. This
provides sufficient protection for indoor storage in normal temperatures for about
12 months.
6.2.1 Standing the motor on a flat surface
Unsecured motor can fall
Danger to life or risk of injury, damage to equipment.
▶ When in storage or during oil filling, the motor must always be secured from
falling.
Incorrect placement of the motor
Risk of damage to equipment.
▶ When in storage with shaft vertical, the motor must always be placed with the
hollow shaft facing down.
▶ It is also advisable to provide supports at the mounting surface of the motor,
see Fig. 11.
When the motor is placed on a flat surface such as a floor, it must stand either on
its outer diameter or on the suitably protected end face of the hollow shaft. It is
also advisable to provide supports shown in Fig. 11.
A) Standing with
shaft horizontal
Support
DANGER
NOTICE
B) Standing with
shaft vertical
RE 15305-WA, Version 11.2019, Bosch Rexroth AB
19/76
DD00104812