Product Installation - Bosch Rexroth Hagglunds CA Series Installation & Maintenance Manual

24/76 Hägglunds CA Radial piston hydraulic motor | Installation
Bosch Rexroth AB, Version 11.2019, RE 15305-WA
7.4

PRODUCT INSTALLATION

Before the installation, drain all fluids from the motor.
Danger from suspended loads
Danger to life or risk of injury, damage to equipment! Improper transportation
may cause the Hägglunds motors to fall down leading to injuries e.g. crushing or
broken bones or damage to the product.
▶ Make certain that the forklift truck or lifting device has adequate lifting
capacity.
▶ Never stand under or put your hands under suspended loads.
▶ Ensure your position is stable during transportation.
▶ Use PPE (e.g. safety glasses, safety gloves, suitable working clothes, safety
shoes).
▶ Use suitable lifting device for transport and storage, installation and for
removal and repair. Make sure the motor is well mounted or anchored when
the lifting device is disconnected.
▶ Observe the prescribed position of the lifting strap.
▶ Observe the local federal laws and regulations on work and health protection
and transportation.
Risk for pressurized hydraulic fluid in the motor due to temperature variations
Risk of health hazard, environmental pollution.
▶ Be careful when opening plugs.
▶ Use PPE (e.g. safety glasses, safety gloves).
Contact with hydraulic fluid
Hazard to health/health impairment e.g. eye injuries, skin damage, toxication
during inhalation!
▶ Avoid contact with hydraulic fluids.
▶ When working with hydraulic fluids, strictly observe the safety instructions
provided by the lubricant manufacturer.
▶ Use PPE (e.g. safety glasses, safety gloves, suitable working clothes, safety
shoes).
▶ If hydraulic fluid should, inadvertently comes into contact with your eyes or
bloodstream or is swallowed, consult the medical care immediately.
Escaping or spilling hydraulic fluid
Environmental pollution and contamination of the ground water!
▶ Always place a drip tray under the Hägglunds motor when filling and draining
the hydraulic fluid.
▶ Use an oil binding agent if hydraulic fluid is spilled.
▶ Observe the information in the safety data sheet for the hydraulic fluid and
the specifications provided by the system manufacturer.
DANGER
CAUTION
NOTICE