Table of Contents
Advertisement
14/57
Transport and storage
5.3
Product storage
5.4
Storage times
Cables and connectors
Bosch Rexroth AG R911389762_Edition 04
WARNING
Do not lift or move the primary part on the cable strand.
Store the motor components in their original package at a dry, dust free, vi‐
bration free and light protected place without direct solar radiation. Observe
the specified classes 1K3, 1B1, 1C2, 1S1, 1M1 of DIN EN 60721-3-2 for stor‐
age.
NOTICE
Use coverings to protect the products from moisture.
Store them only in rainproof and dry rooms.
Upon delivery, protective sleeves and covers can be attached to Bosch
Rexroth motors. They have to remain on the motor for transport and storage.
Remove the ML3S transport and assembly protection just before or during
the assembly. Make sure that no small ferromagnetic parts like screws get in‐
to contact with the magnets or secondary parts.
Independed from the storage time of the motor components (observe the
warranty claim), the function is preserved under observance and execution of
additional measures at start-up.
Storage time
Measures prior to commissioning
< 1 year
None
1 ... 5 years
Check the electric contacts to verify that they are free from corrosion
Check the electric contacts to verify that they are free from corrosion
> 5 years
Visually inspect the cable jacket. Do not use the cable if you detect any
abnormalities (squeezed or kinked spots, color deviations, ...).
Tab. 5-1:
Measures before commissioning of cables and connectors that have
been stored over longer periods of time
ML3 Self-Cooled Linear Motors
Material damage due to improper handling
during transport!
Damage due to moisture and humidity!
Advertisement
Table of Contents
