Table of Contents
Advertisement
ML3 Self-Cooled Linear Motors
Wire designation of temperature
sensor connection cable
Connection cable characteristics
Connection cable power
Cross section
Primary part
ML3P03
ML3P06-B...
ML3P06-C...
ML3P06-D...
ML3P06-E...
ML3P06-F...
ML3P06-HNBKN
ML3P06-HNBRN
ML3P11-D...
ML3P11-E...
ML3P11-F...
ML3P11-H...
ML3P11-L...
Temperature connection cables
ML3P03
ML3P06
ML3P11
6.7.2
Electrical connection primary part
Temperature sensor
PTC110-EK
KTY83-122
Shield
Tab. 6-11:
Wire designation of temperature sensor connection cable
Cable diameter [mm]
[mm²]
4 x 1.0
8.3
4 x 1.0
9.6
4 x 2.5
11.4
4 x 0.14
4.3
Tab. 6-12:
Connection cable characteristics
The power connection cable at the primary part is designed for a
continuous current at standstill I
cross-section of the extending power cable has to be selected ac‐
cording to the actual maximum effective current load. The cross
sections of both cables may deviate.
Before connection of the primary parts, observe the information on suitability
for drag chains of individual connection cables at the primary part in
Cables that are not suitable for drag chains must be routed in fixed installa‐
tion (see
Fig.
6-15) to a junction, e.g. device connector or terminal box. From
Wire color
WH
BN
GN
YE
Metal braiding
Bending radius
static [mm]
dynamic [mm]
33.2
83
57.6
Not permitted
68.4
25.8
Not permitted
for installation mode A. The
0
R911389762_Edition 04 Bosch Rexroth AG
29/57
Assembly
Weight
[kg/m]
0.18
0.27
0.033
Fig.
6-9.
Advertisement
Table of Contents
