Battery Operation - Silvercrest SED 3.7 B2 Operating Instructions Manual

Battery operation

1) Insert the connector plug of the mains power adapter 9 into the
socket for mains adapter 8 on the appliance. Ensure that the
speed switch 6 is set at "0".
2) Connect the mains power adapter 9 to a mains power socket.
GB
The control lamp 7 glows red to indicate that the charging
process is active.
As soon as the control lamp 7 glows green the appliance is fully
charged and you can disconnect it from the mains power supply.
NOTICE
► For the initial charging, the appliance requires about
80 minutes to fully charge.
First recharge the appliance when the control lamps 7 indi-
►
cate, by alternately fl ashing red and green, that the battery
charge level is low..
40
SED 3.7 B2