Smoothing Using The Clothes Brush - Silvercrest SDMF 1100 A1 Operating Instructions Manual

__296303_Dampfbürste_mit_Fuß_B6.book Seite 9 Dienstag, 24. Oktober 2017 1:16 13
1. Insert the mains plug 10 into an
earthed wall socket corresponding to
the technical data.
The control light 1 flashes.
2. When the device is ready to steam, the
control light 1 will be lit continuously.
Start smoothing.
3. Hold down the steam jet button 4 while
moving the steam brush smoothly over
the item of laundry.
4. If water drips out of the steam unit 3, re-
lease the steam jet button 4 so that the
device can heat up.
6.5 Smoothing using the
clothes brush
DANGER! Risk of injury
through burning!
Please wait until the device has cooled
down before you attach and remove the
clothes brush 2.
Never smooth clothes while they are be-
ing worn.
Allow the items of clothing to cool down
on a clothes hanger before you wear
them.
Attaching the clothes brush
• Slide the clothes brush 2 over the steam
unit 3 and press it firmly into position.
The small wing 12 must be on the un-
derside.
Removing the clothes brush
• To release the clothes brush 2, pull light-
ly on the small wing 12 on the under-
side of the clothes brush. The clothes
brush then comes loose very easily.
Caring for your garments
1. Figure B: hang the crumpled item of
laundry on a clothes hanger.
2. Pull the item of laundry flat with one
hand, applying the steam from top to
bottom. Apply slight pressure using the
clothes brush 2 and move the device
over the item of laundry from top to
bottom. The combination of steam and
the clothes brush 2 gently removes all
of the creases.
Caring for curtains and uphol-
stery
1. Remove creases and wrinkles from dra-
pery by hanging them over a rail.
2. Follow the instructions under "Caring
for your garments".
3. Always carry out a test beforehand on
a spot which is not visible.
4. If you use the device horizontally, hold
it vertically from time to time in order to
obtain the maximum steam power.
3
2
12
9
GB