Table of Contents
Advertisement
1-5. Replacing the Main Parts
1-5-1. Replacing the LCD Module
n
When replacing the LCD module, perform the adjustment
of Section 3.
1. Release the hook, then rotate the elbow assembly in
the direction of the arrow 1.
2. Remove the elbow assembly in the direction of the
arrow 2.
Elbow assembly
3. Remove the three screws, then remove the stopper.
4. Open LCD in the direction of the arrow.
Stopper
1-4 (E)
Hook
2
1
B2 x 5
LCD
5. Remove the four screws (B2 x 5), then remove the
rotation base cover.
6. Remove the four screws (B2.6 x 8), then remove the
rear chassis assembly.
Rotation base cover
B2 x 5
7. Disconnect the harness from the connector (CN1) on
the LE-341 board.
8. Remove the four screws, then remove the ground
terminal and LCD module.
9. Disconnect the harness from the connector (CN1) on
the LE-342 board.
10. Disconnect the harness from the connector (CN102)
on the LCD module.
LE-342 board
CN1
Harnesses
B2.6 x 8
Rear chassis
assembly
LE-341 board
Harness
CN1
Ground
terminal
CN102
B2 x 5
LCD module
HDVF-C35W
Advertisement
Table of Contents
