Table of Contents
Advertisement
2-3. OPERATION Menu
The OPERATION menu contains the setting items required when the camera operator is using the device.
For more information, refer to the operation manual that comes with this device.
2-4. SERVICE Menu
The SERVICE menu contains items required for maintaining this unit, such as electrical alignment,
HOURS METER, and self-diagnosis function.
m
. The next menu item may not be selectable depending on the current menu item setting.
. "___" is displayed as the parameter for unselectable items.
Page Menu
Items
*1
S01
COLOR
ADJUST BIAS R
TEMP
ADJUST BIAS G
ADJUST BIAS B
ADJUST GAIN R
ADJUST GAIN G
ADJUST GAIN B
S02
GAMMA/
GAMMA SELECT
KNEE
KNEE POINT
KNEE SLOPE
S03
PEAKING
FREQUENCY
SOURCE
B MIX GAIN
CRUMPLE
RGB MIX
CRISPENING
HDVF-C35W
Setting (
indicates the default)
_512 to [1] to 511
_512 to [1] to 511
_512 to [1] to 511
0 to [128] to 255
0 to [128] to 255
0 to [128] to 255
[1]
0 to [237] to 255
1/2, 1/3, [1/4], CLIP
L, [M], MH, H
NAMY, [Y], RGB
[0|dB], _6 dB, _12 dB, _18 dB
0 to [1] to 3
[R], G, B, CY, MG, YL,
SKIN, SKY, FOIL, ORAN
[0] to 63
Function
Adjusts the black level color
temperature.
Adjusts the white level color
temperature.
Switches the gamma table
Currently, only 1 is valid.
Sets the knee point level.
Sets the knee slope level.
Sets the center frequency of the
peaking signal.
Sets the video signal that makes
the peaking signal.
Sets the mix gain that mixes the
peaking signal to the B ch.
Sets the bit shift for crumpling
the peaking signal.
Sets the mix gain for R ch, G ch,
and B ch when mixing the
peaking signal to the main signal.
This setting is enabled only
when RGB is selected in
SOURCE.
Sets the level for crispening the
peaking signal.
2-3 (E)
Advertisement
Table of Contents
