GE Vivid T8 Basic Service Manual page 217

7-3-1-1 Setting the P2 Key to Screen Capture
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
If the P2 Key is not set to screen capture:
1. While on the Connectivity screen, with the Buttons tab
displayed, go to the Destinations list.
2. From the list select Store to clipboard. Press [>>] to add
the selection to the Selected devices section.
3. Ensure that the Button section for Image frames is set to
Whole Screen, secondary Capture and No Image
Compression.
4. The P2 Key should now be set up for whole screen capture,
sending the screens to the image buffer (clipboard).
Screen Capture
7-7