GE Vivid T8 Basic Service Manual page 296

Replacement Procedures
8-4-13 Installation Wizard(continued)
Preset Parameter
Enable DHCP
8-38
Table 8-3: Network settings
Select to enable DHCP.
5. Press Next to continue.
6. This screen shows the report of the previous settings. You
can export it to the database.
Figure 8-28. Summary Information
Press Export and select the location where you want to
store the report.
Figure 8-29. Export Summary
7. Press Exit to exit Installation Wizard.
Description
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3