Playing Audio - DeWalt DCR011 Original Instructions Manual

EngLIsh
before cleaning, making any adjustments or
removing/installing attachments or accessories.
Button Functions (Fig. A)
Power Button
Press the power button to turn the speaker either on or off.
1
Play/Pause Button
Press the play/pause button 5
from the audio device. Press the play/pause button again to
pause play.
Volume Adjustment Buttons
The volume buttons 2 can be used to increase or decrease
volume on the speaker.
Track Change Buttons
The right and left track change buttons
go to previous tracks on the audio device.
nOTE: The track change buttons will function only when paired
via Bluetooth®.

Playing Audio

Audio can be played through the speaker via a wireless
Bluetooth® connection to a compatible Bluetooth® audio device.
Pairing Speaker with a Bluetooth® Audio Device
(Fig. A)
1. Place the speaker and the Bluetooth® audio device within
1 m (3 feet) of each other.
2. Turn on the speaker by pressing the power button
3. Be sure the Bluetooth® audio device has Bluetooth® turned
on. (Please consult your device's instruction manual for
specific pairing instructions.)
4. Press the Bluetooth® button
cause the Bluetooth® status indicator
During this time, the speaker is trying to find a previously
paired device. If found, the Bluetooth® status indicator will
stay lit without any blinking.
5. If another device is to be paired, the Bluetooth® status
indicator will blink rapidly. While the speaker is displaying
the fast blink, it is in pairing mode with a new device.
6. Confirm pairing on your device.
nOTE: If pairing is not confirmed within 5 minutes, the
status indicator will stop flashing and will return to a half
second interval blink pattern.
7. Once pairing is successful, the Bluetooth® status indicator
will turn solid. The speaker will now play audio from
your device.
26
to begin playing a selection
can be used to skip or
3
1 .
on the speaker. This will
6
4 to blink slowly.
Bluetooth® status Indicator
Blink Patterns
Steady blinking (half Speaker is unpaired or in
second interval) connecting mode.
Rapid Blinking Speaker is in pairing mode and
discoverable by your device.
Solid light Speaker is connected with a device.
No light Speaker has timed out and/or is off.
connecting a Previously Paired Bluetooth® audio Device
If a Bluetooth® device has been previously paired to the speaker,
it should automatically reconnect when the speaker is powered
on. After 4 seconds, the speaker will go into connecting mode.
This is indicated by the Bluetooth® status indicator
steadily. Once the previously paired Bluetooth® device is
recognized and connected, the Bluetooth® status indicator will
stop blinking and turn solid. If connection does not occur and
you are unable to stream audio, please follow the instructions
for Pairing Speaker with a Bluetooth® Audio Device.
nOTE: The Bluetooth® audio device must have Bluetooth®
turned on to automatically pair.
Timeout Functionality (Fig. a)
To conserve battery life, the speaker is designed to power off
automatically after a half hour of inactivity. This inactivity could
be due to the device being unpaired for a half hour or in the
case of the Bluetooth® connection being broken for the same
period of time. If the speaker powers off due to inactivity of
any kind, refer to Connecting a Previously Paired Bluetooth®
Audio Device.
nOTE: Optimum Bluetooth® streaming range is roughly 9 m
(30 feet) (line of sight) to the speaker, but distances up to 30 m
(100 feet) are possible. Physical obstacles, other wireless devices
or electromagnetic devices may affect the connection quality.
If Bluetooth® connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles or
otherwise, reconnecting your device with the speaker may
be necessary.
Incoming call
If your phone receives a call while it is connected to the speaker,
it will pause the Bluetooth® connection.
MAINTENANCE
This D WALT unit has been designed to operate over a long
e
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper care and
regular cleaning.

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect battery pack
before cleaning, making any adjustments or
removing/installing attachments or accessories.
The charger and battery pack are not serviceable.
status/Mode
4 blinking