Operation - Panasonic FV-0511VH1 Operating And Installation Instructions

OPERATION

WARNING
Use this fan heater only in the manner
intended by the manufacturer.
If you have any questions, contact the
manufacturer. Any other use not
recommended by the manufacturer may
cause fire, electric shock, or injury to
persons.
See "MAINTENANCE" on pages 14-15 for
user maintenance.
OPERATING INSTRUCTIONS
Please operate as shown in the following after installation. (Fig.16)
Switch Mode
"Heat" Heating
"Vent" Ventilating
Both of
Heating
"Heat"
and
Ventilating
"Vent"
"Light"
"Night-Light" Night-Light
Switching operating modes requires a slight delay to change the internal shutter positions.
(The light mode and night light mode excluded.)
Pick-A-Flow™ switch is not available to set ventilation air volume while operating in the heating and
ventilating mode. (Adequate ventilation air volume is provided to reduce heat loss in a bathroom)
Timer function
The heat switch circuit will turn off in 2 hours if a user forgets to turn off the switch.
If this happens, move the "Heat" or "Vent" switch back to the "OFF" position to reset the
timer function and resume operation according to the switch status.
Heat
Switch
Vent
Heating
Mode
Function
Heating the bathroom
Ventilating the bathroom
Exhausting moisture
and
while keeping the
bathroom warm
Light Turns on the main light
Turns on the night light
Example 1
2 hours
later
Heat
ON
OFF
Vent
Do not attempt to use the fan heater before
it is completely and properly installed.
Do not disassemble the the fan heater for
maintenance with a method which is not in
the instructions. Any maintenance other
than user maintenance should be performed
by specialized serviceman.
Do not tamper with the fan heater.
*
Heat
ON
OFF
Vent
Heating
Power off
Ventilating
Switch labels
Light
Heat
Night-Light
Vent
For Model
FV-0511VHL1
Attach switch labels to the wall
switch as shown above. (Fig.16)
Example 2
2 hours
later
ON
ON
and
*
Heat
Vent
For Model
FV-0511VH1
Fig.16
Heat
ON
ON
Vent
Ventilating
13
English