Panasonic FV-0511VH1 Operating And Installation Instructions page 4

IMPORTANT INSTRUCTIONS CONTINUED
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or damage the fan heater.
This fan heater is hot when in use. To avoid burns, do not let bare skin touch the hot
surfaces of the fan heater. Keep combustible materials, such as furniture, pillows,
bedding, papers, clothes, curtains, etc. at least 3 feet(0.9m) away from the fan heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not tamper with the fan heater.
Never use gasoline, benzene, paint thinner or any other such chemicals for cleaning
the fan heater.
If the fan heater malfunctions, do not continue to use it. Disconnect power at service
panel and have fan heater inspected by a reputable electrician before using it again.
CAUTION
Make sure that the electric service supply voltage is AC 120 V, 60 Hz.
To disconnect fan heater, turn all switches to off, and
shut off power to the circuit.
Do not install this fan heater where interior room
temperature may exceed 104 ˚F (40 ˚C).
Not for use in cooking area. (Fig.A)
Use the ventilating mode for general ventilation only.
Do not use the fan heater to exhaust hazardous or
explosive materials and vapors.
NOTICE
When one switch is connected with two or more products in parallel, the fan heater
may not function. Therefore, parallel connection should not be allowed.
Provide make up air for proper ventilation.
Do not install the fan heater where ducts are configured as shown below.
Excessive bending
SAVE THESE INSTRUCTIONS
4
English
Successive bending Squeezed duct Bend close to duct adaptor
(Cooking area)
Do not install above or
inside this area
Floor
Cooking
equipment
Fig.A
Adaptor