Table of Contents
Advertisement
26
www.aeg.com
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic switch-off
For safety reasons the oven turns off
after some time, if a heating function
works and you do not change any
settings.
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
11. HINTS AND TIPS
Refer to Safety chapters.
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
(°C)
12.5
8.5
5.5
3
10.6 Brightness of the display
There are two modes of display
brightness:
) to start
Day brightness
It is on when the
oven is turned on.
It is on for 10 sec
when you touch any
sensor field during
the night brightness
mode.
It is on when the
oven is turned off
and you set the
function: Minute
Minder. When the
function ends, the
display goes back
to the night bright‐
ness.
(h)
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
Night bright‐
ness
When the oven is
turned off, the dis‐
play is in night
brightness mode
between 10 PM and
6 AM.
Advertisement
Table of Contents
