Siemens MPP 464 IE H Equipment Manual page 43

Mounting position LEDs
Figure 5-3 Mounting position LEDs MPP 464 IE H
Marking of the anode connection:
Changing the lamps on illuminated pushbuttons
1. Use a screwdriver to pull the pushbutton cap forward and off.
2. Use lamp remover LZ6 to lever out the key carrier.
3. Change the lamp using service tool LZ6 or a suitable insulating tube
4. Reinstall the key carrier and button cap in reverse order.
Lamp remover LZ6 is not a SIEMENS product. It can be obtained from Schlegel:
Georg Schlegel GmbH & Co. KG
Am Kapellenweg
88525 Dürmentingen
Germany
Changing the lamps of indicator lights
1. Use a screwdriver to pull the calotte and name bearing element forward and off.
2. Change the lamp using the lamp remover of service tool LZ6 or a suitable insulating tube.
3. Reinstall the calotte and name bearing element.
Machine Pushbutton Panel: MPP 464 IE H
Equipment Manual, 03/2021, A5E50810237B AA
+
Insert polarity+ of the LED in button at the side marked
+
+ +
+ + + +
Phone: +49 (7371) 502-0
Fax: +49 (7371) 502-49
Email: info@schlegel.biz
Mounting
43